Safety data sheet PTEN
Download PDF All documents

Material Safety Data Sheet · MSDS (SDS)

Lavee Solar

Waterless cleaning product for photovoltaic panels. Document prepared in accordance with ABNT NBR 14725 (Brazilian standard based on the GHS).

MSDS 0775/01
Version 0005
Date 15 Jan 2026
SDS-ID Ecadil 0775
NO
PICTOGRAM
  • Not classified — no safety symbol and no signal word.
  • Transport: not classified as dangerous goods (ANTT and IMDG).
  • Protection: gloves and safety glasses. In case of contact with skin or eyes, rinse with water.
  • Storage: closed container, in a dry, ventilated place protected from light.
Summary taken from sections 3, 8 and 14 of this sheet. If in doubt, the text of the sections prevails.

1Product and company identification

Product nameLavee or Lavee Plus
Trade namesLavee · Lavee Limpeza Seco · Dry Cleaning Lavee
Recommended useProduct for cleaning photovoltaic panels, without the use of water
Chemical nameMixture of polycondensed esters (low molecular weight), quaternary ammonium compound and sequestering agents. 5th-generation quaternary ammonium compound
CAS No.157905-74-3 · 68551-12-2 · 7732-18-5 · 178949-82-1
Molecular formula(C8 – H17 – N5. HCl) n
Packaging5 L · 20 L · 200 L · 1,000 L (IBC)
SupplierBioForcis Soluções Tecnológicas Ltda.
CNPJ (Brazilian company ID) 29.682.756/0001-40
Rua Iracy Rozatti Viel, 68, Lote 11 — Vinhedo, SP — Brazil — CEP 13287-011
contato@bioforcis.com.br · www.bioforcis.com.br
ManufacturerIcaraí do Brasil Indústria Química Ltda.
Rua Rondônia, 03 — Cosmópolis, SP — Brazil
Emergency telephone+55 19 3872-3033 (24 hours) · 0800 013433 (toll-free in Brazil)
Poison Control Center+55 19 3521-7555
Anvisa (Brazilian Health Regulatory Agency)0800-722-6001 (toll-free in Brazil)
Toxicological information+55 19 3251-7660

2Composition and information on ingredients

Chemical nameCAS No.Range (% w/w)
Amacitel fragranceNA0.001 ~ 0.05
Cyclic aliphatic quaternary ammonium157905-74-30.05 ~ 1.00
Silane polyol polyether68551-12-20.07 ~ 1.55
Demineralized water7732-18-587.90 ~ 98.99
L-Aspartic acid, N,N'-1,2-ethanediylbis-, trisodium salt178949-82-10.78 ~ 1.53

3Hazard identification

GHS classification in accordance with ABNT NBR 14725.

Physical hazardsNon-corrosive — Category 5
Human health hazardsAcute toxicity — Category 5
Skin corrosion / irritation — Category 5
Eye irritation — Category 5
Environmental hazardsNon-corrosive. Aquatic environment — Category 5
Safety symbols and signal wordsNot classified
Hazards to water treatmentNot identified
Precautionary statementsWear gloves and safety glasses. In case of contact with skin and eyes: rinse with water. If inhaled: move the person to a ventilated area and keep at rest.
StorageUse appropriate containers. Not flammable and not oxidizing.
DisposalFollow the applicable environmental legislation.
Other hazards which do not result in classificationNot determined

4First-aid measures

InhalationMove the victim to fresh air.
Skin contactWash the area with soap and water. If any symptoms occur, see a doctor.
Eye contactRinse the eyes with water as a precaution. Remove contact lenses. Protect the unaffected eye. If irritation persists, consult a specialist.
IngestionDo not induce vomiting unless instructed by a doctor. Give the victim two glasses of water. Never give anything by mouth to an unconscious person. If symptoms persist, consult a doctor.
Symptoms and effects, acute and delayedSlightly corrosive to the skin.
Notes to physicianSymptomatic treatment.

5Firefighting measures

Suitable extinguishing mediaAdapt firefighting measures to local conditions and the surrounding environment. Use water, foam, carbon dioxide (CO₂) or dry powder.
Hazardous combustion productsNot identified.
Protection of firefightersWear full protective equipment (accessories and clothing).

6Accidental release measures

Personal precautions — non-emergency personnelAvoid inhalation and contact with skin, mucous membranes and eyes; use the recommended personal protective equipment. Follow emergency procedures and consult a specialist.
Personal precautions — emergency respondersWear personal protective equipment. Comply with all applicable local, regional and national regulations.
Environmental precautionsPrevent the product from entering the sewage system.
Methods for containment and cleaning upSpilled material must be cleaned up by a qualified person. Contain the leak. Collect as much of the material as possible with the help of tools. Clean up the residue and collect the cleaning solution. Keep in suitable closed containers until disposal.

7Handling and storage

Safe handlingFor personal protection, see section 8. Avoid contact with the eyes. Avoid prolonged or repeated contact with the skin.
Safe storageKeep the container tightly closed in a dry, well-ventilated place, protected from light.

8Exposure controls and personal protection

Engineering control measuresAppropriate technical measures and work practices should take priority over the use of personal protective equipment.
Hand protectionWear rubber gloves.
Eye protectionAvoid contact with the eyes.
Body and skin protectionWear cotton clothing and safety boots with a leather toe cap.
Respiratory protectionWear a protective mask.
Thermal protectionNot applicable.
Personal hygieneClothing, gloves, footwear and PPE must be cleaned before reuse. Use hot water, soap and cleansing creams. Wash hands before using the toilet, eating or drinking. Do not use gasoline, diesel or any other petroleum-derived solvent for personal hygiene.

9Physical and chemical properties

Physical state, color and odorColorless to slightly yellowish, uniform liquid
pH6.50 ~ 7.50 (10% at 25 °C)
Boiling point / range100 °C
Melting point / range−4 °C
Flash pointNot determined
Explosion limits (LEL / UEL)Not determined
Auto-flammabilityNot determined
Vapor pressure18 mmHg
Solubility in waterSoluble
Relative density1.00
Vapor densityNot applicable
Volatile organic compoundsNot determined
Percentage of volatilesNot determined
Evaporation rateNot determined
Viscosity10 to 200 mPa·s / 20 °C

10Stability and reactivity

ReactivityStable. Hazardous polymerization will not occur.
Chemical stabilityStable. Hazardous polymerization will not occur.
Possibility of hazardous reactionsNo data available
Conditions to avoidNo data available
Incompatible materials or substancesNo data available

11Toxicological information

Acute toxicityMay be harmful if swallowed.
Local effectsSkin irritation may occur in some people.
Chronic toxicityPeople susceptible to dermatitis may find their condition aggravated.

12Ecological information

EcotoxicityNot toxic
Persistence and degradabilityAfter neutralization, degradation is rapid: less than 72 h for 80%
Bioaccumulative potentialNo data available
Mobility in soilNo data available
Other adverse effectsNo data available

As regulations vary, consult the applicable legislation or the authorities before disposing of waste.

13Disposal considerations

Product as soldIncinerate in an incinerator licensed for hazardous waste. Alternatively, dispose of the product residue at a site licensed for hazardous waste. Neutralize first.
Special instructionsAs regulations vary, consult the applicable legislation or the authorities before disposing of waste.

14Transport information

Land transport (ANTT — Resolution 5998/2022, Brazil)Product not classified as dangerous for transport.
Sea transport (IMDG Code)Product not classified as dangerous for transport.

About this document. English translation of the technical content of MSDS 0775/01, version 0005, of 15 Jan 2026, presented in the BioForcis graphic standard. No technical data have been changed; the company's CNPJ and typing errors in the original were corrected. In case of discrepancy, the Portuguese version prevails. The original sheet in PDF, as well as test reports and approval letters, is sent on request via WhatsApp +55 11 97351-1188.

The information in this sheet represents current data and reflects our best knowledge for the proper handling of this product under normal conditions and in accordance with the application specified on the packaging and in the literature. Any other use of the product, including use combined with another product or with other processes, is the user's responsibility.