1Product and company identification
| Trade name | Lavee Xtreme |
| Technical name | ICACITRICO 50% |
| Recommended use | Cleaning product (Anvisa “saneante” category) for fixed surfaces |
| Manufacturer | Icaraí do Brasil Ind. Química Ltda. — EPP Rua Rondônia, 3 — Jacutinga, MG — Brazil Telephone +55 35 99820-3336 · sac@icaraidobrasil.com.br |
| Supplier | BioForcis Soluções Tecnológicas Ltda. CNPJ (Brazilian company ID) 29.682.756/0001-40 Rua Iracy Rozatti Viel, 68, Lote 11 — Vinhedo, SP — Brazil — CEP 13287-011 contato@bioforcis.com.br · www.bioforcis.com.br |
| Emergency telephones | +55 19 3521-7555 · +55 19 3521-6700 · +55 19 3521-7277 Toxicological Information and Assistance Center |
| Product shelf life | 24 months |
2Composition and information on ingredients
| Formula | C₆H₈O₇ |
| CAS No. | 77-92-9 |
| EC No. | 201-069-1 |
| Molar mass | 192.12 g/mol |
3Hazard identification
| Classification (Regulation (EC) No 1272/2008) | Eye irritation, category 2 — H319 |
| Classification (67/548/EEC or 1999/45/EC) | Xi — Irritant, R36 |
| Pictogram | GHS07 |
| Signal word | Warning |
| Hazard statement | H319 — Causes serious eye irritation. |
| Precautionary statements | P305+P351+P338 — IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. |
| R-phrase | R36 — Irritating to eyes. |
| S-phrase | S26 — In case of contact with eyes, rinse immediately with plenty of water and seek medical advice. |
4First-aid measures
| After inhalation | Fresh air. |
| After skin contact | Rinse with plenty of water. Take off contaminated clothing. |
| After eye contact | Rinse out with plenty of water. Immediately call in an ophthalmologist. |
| After swallowing | Make the victim drink water immediately (two glasses at most). Consult a physician. |
| Symptoms and effects, acute and delayed | Irritant effects, cough, pain, vomiting with blood. |
| Medical attention and special treatment | No information available. |
5Firefighting measures
| Suitable extinguishing media | Water, carbon dioxide (CO₂), foam or dry powder. |
| Unsuitable extinguishing media | No limitations of extinguishing agents are given for this substance or mixture. |
| Special hazards | Combustible material. In case of fire, flammable gases and hazardous vapors are formed. |
| Protection of firefighters | Wear self-contained breathing apparatus in case of fire. |
| Further information | Prevent firefighting water from contaminating surface water or groundwater. |
6Accidental release measures
| Non-emergency personnel | Avoid generating dust. Avoid contact with the substance. Ensure adequate ventilation. Evacuate the danger area, follow emergency procedures and consult a specialist. |
| Emergency responders | Protective equipment: see section 8. |
| Environmental precautions | Do not let the waste enter the drains. |
| Methods for containment and cleaning up | Cover drains. Collect, bind and pump off spills. Observe possible material restrictions (see sections 7 and 10). Take up dry. Proceed with waste disposal and clean up the affected area. Avoid generating dust. |
7Handling and storage
| Safe handling | Observe the label precautions. |
| Storage and incompatibilities | Do not use metal containers. Keep tightly closed, in a dry place. Store at +15 °C to +25 °C. |
| Specific end uses | No specific uses are foreseen apart from those mentioned in section 1. |
8Exposure controls and personal protection
| Control parameters | Contains no substances with occupational exposure limit values. |
| Planning measures | Appropriate technical measures and work practices should take priority over the use of personal protective equipment. See section 7. |
| Personal protection | The type of body protection must be chosen according to the concentration and amount of the hazardous substances, in line with the specific conditions of the workplace. The chemical resistance of the protective equipment should be confirmed with the suppliers. |
| Hygiene measures | Change contaminated clothing. Preventive skin protection. Wash hands after finishing work. |
| Skin and eye protection | Tight-fitting safety glasses. |
| Hand protection | Nitrile rubber gloves, thickness 0.11 mm, breakthrough time > 480 min, also for splash contact. Gloves must comply with directive EC 89/686/EEC and standard EN 374 — for example, KCL Dermatril L (full contact) and KCL 741 Dermatril L (splash contact). Breakthrough times were determined by KCL in tests according to EN 374, with samples of the recommended glove types. If dissolved in or mixed with other substances, consult the supplier of CE-marked gloves. |
| Other protective equipment | Protective clothing. |
| Respiratory protection | Required when dust is generated. Recommended filter type: P2. |
| Environmental exposure controls | Do not let the waste enter the drains. |
The employer must ensure that the maintenance, cleaning and testing of respiratory protective devices are carried out according to the producer's instructions, and that these measures are documented.
9Physical and chemical properties
| Physical state | Liquid |
| Color | Colorless |
| pH | About 1.7 at 100 g/L, at 20 °C |
| Melting point | About 153 °C (decomposition) — OECD 102 |
| Boiling point / range | 200 °C at 1,013 hPa (decomposition) |
| Combustion point | Not applicable |
| Vapor pressure | < 0.1 hPa at 20 °C |
| Relative density | 1.665 g/cm³ at 18 °C — OECD 109 |
| Solubility in water | 1,330 g/L at 20 °C |
| Partition coefficient (n-octanol/water) | log Pow −1.72 (20 °C) — OECD TG 117. No bioaccumulation is expected. |
| Decomposition temperature | 175 °C |
| Ignition temperature | 540 °C |
| Bulk density | About 560 kg/m³ |
| Other properties | Evaporation rate, flammability, explosion limits, relative vapor density, auto-ignition temperature, dynamic viscosity, explosion hazards and oxidizing properties: no information available. |
10Stability and reactivity
| Reactivity | The following generally applies to flammable organic substances and preparations: when finely distributed, a dust explosion potential may be assumed. |
| Chemical stability | The product is chemically stable under standard ambient conditions. |
| Possibility of hazardous reactions | Violent reactions are possible with metals, oxidizing agents, bases and reducing agents. |
| Conditions to avoid | Strong heating. |
| Incompatible materials | No information available. |
| Hazardous decomposition products | No information available. |
11Toxicological information
| Acute oral toxicity | LD50 rat: 3,000 mg/kg (RTECS). Symptoms at high doses: irritation of mucous membranes, pain, vomiting with blood. |
| Acute inhalation toxicity | Symptoms: irritation of the respiratory tract. |
| Skin irritation | Rabbit: no irritation (OECD 404). Slight irritation. |
| Eye irritation | Rabbit: severe irritation (OECD 405). Causes serious eye irritation. |
| In vitro genotoxicity | Ames test: negative (literature). |
| Reproductive toxicity | No reduction in reproductive capacity in animal experiments (literature). |
| Teratogenicity | Did not show teratogenic effects in animal experiments (literature). |
| Specific target organ toxicity | The substance or mixture is not classified as a specific target organ toxicant, by single or repeated exposure. |
| Aspiration hazard | Based on the available data, the classification criteria are not met. |
| Further information | A substance that occurs in the human body under physiological conditions. After swallowing large amounts: cough. Other hazardous properties cannot be excluded; handle in accordance with good industrial hygiene and safety practice. |
12Ecological information
| Toxicity to fish | LC50 Leuciscus idus (golden orfe): 440–760 mg/L, 96 h (IUCLID) |
| Toxicity to aquatic invertebrates | EC50 E. sulcatum: 485 mg/L, 72 h (literature). EC50 Daphnia magna: about 120 mg/L, 72 h (IUCLID) |
| Toxicity to algae | IC5 Scenedesmus quadricauda: 640 mg/L, 7 d. IC5 M. aeruginosa: 80 mg/L, 8 d (toxic threshold concentration, literature) |
| Toxicity to bacteria | EC50 Pseudomonas putida: > 10,000 mg/L, 16 h (literature) |
| Biodegradability | 98% in 2 days — OECD TG 302B (IUCLID). Readily eliminated. |
| BOD / COD / ThOD | BOD 526 mg/g (5 d) · COD 728 mg/g · ThOD 750 mg/g (calculated) |
| Bioaccumulative potential | log Pow −1.72 (20 °C) — OECD TG 117. No bioaccumulation is expected. |
| Mobility in soil | No information available. |
| PBT and vPvB assessment | Not carried out, as a chemical safety assessment is not required. |
| Other adverse effects | Harmful effect due to pH shift. Discharge into the environment must be avoided. |
13Disposal considerations
| Waste treatment | Waste must be disposed of in accordance with Directive 2008/98/EC and other national and local regulations. Keep chemicals in their original containers. Do not mix with other waste. Handle uncleaned containers in the same way as the product itself. |
14Transport information
| National and international regulations | Not dangerous goods under transport regulations. |
15Regulatory information
| Specific regulations | Storage class 10–13. |
| Chemical safety assessment | No chemical safety assessment is carried out for this product. |
16Other information
| Full text of H-statements | H319 — Causes serious eye irritation. |
| Full text of R-phrases | R36 — Irritating to eyes. |
| Training advice | Provide adequate information, instructions and training for operators. |
| Standard followed | Sheet prepared in accordance with ABNT NBR 14725-4:2009. |
| Responsible chemist | Reinery Antonio Ferreira dos Reis Santos — CRQ/MG 02102396 (Regional Chemistry Council, Minas Gerais) |
| Revision history | Revision 000, of 22 Dec 2020 — original issue. Revision 001, of 12 Sep 2026 — document re-presented in the BioForcis graphic standard; recommended use adjusted to cleaning product (saneante); supplier CNPJ corrected. No technical data have been changed. |
About this document. English translation of the technical content of FISPQ 025 (MSDS 025), presented in the BioForcis graphic standard. In case of discrepancy, the Portuguese version prevails. The original sheet in PDF, as well as test reports and approval letters, is sent on request via WhatsApp +55 11 97351-1188.
The information in this sheet represents current data and reflects our best knowledge for the proper handling of this product under normal conditions and in accordance with the application specified on the packaging and in the literature. Any other use of the product, including use combined with another product or with other processes, is the user's responsibility.